Fly tying

How to tie the Lime-tailed Hare’s Ear

How to tie the Lime-tailed Hares Ear, a very effective suggestive nymph. Early-season trout find the tail irresistible. Material list for the Lime-tailed Hares Ear Hook: Size 10 medium wet-fly Thread: Brown Tail: Glo-Brite No.12 floss Rib: Gold wire Body: Mixed hares fur Thorax cover: Medium opal Mirage Thorax: Hares mask 1 Place the medium

Would you like to appear on our site? We offer sponsored articles and advertising to put you in front of our readers. Find out more.

How to tie the Lime-tailed Hares Ear, a very effective suggestive nymph. Early-season trout find the tail irresistible.

Material list for the Lime-tailed Hares Ear

Hook: Size 10 medium wet-fly

Thread: Brown

Tail: Glo-Brite No.12 floss

Rib: Gold wire

Body: Mixed hares fur

Thorax cover: Medium opal Mirage

Thorax: Hares mask

Lime-tailed Hares Ear — 1 Place the medium wet-fly hook in the vice and catch the brown thread in behind the eye. Wind the thread down the shank until it is positioned just past the barb.

Step 1 Place the medium wet-fly hook in the vice and catch the brown thread in behind the eye. Wind the thread down the shank until it is positioned just past the barb.

Lime-tailed Hares Ear step 2 — 2 Fold a length of shade 12 Glo-Brite floss to create seven strands and tie in on top of the hook shank with three tight thread turns.

Step 2 Fold a length of shade 12 Glo-Brite floss to create seven strands and tie in on top of the hook shank with three tight thread turns.

Lime-tailed Hares Ear step 3 — 3 Take a length of fine, gold wire and tie it in under the hook shank using tight thread turns. This wire will form the rib.

Step 3 Take a length of fine, gold wire and tie it in under the hook shank using tight thread turns. This wire will form the rib.

Lime-tailed-hares-ear step 4 — 4 Use close thread turns to secure waste ends of floss and wire then remove excess. Mix light and dark hare’s ear fur and apply to the thread.

Step 4. Use close thread turns to secure waste ends of floss and wire then remove excess. Mix light and dark hare’s ear fur and apply to the thread.

Lime-tailed-hares-ear step 5 — 5 Dub the hare’s fur on to the thread to form a tight rope. Wind the dubbed fur along the shank two-thirds of the way towards the eye.

Step 5. Dub the hare’s fur on to the thread to form a tight rope. Wind the dubbed fur along the shank two-thirds of the way towards the eye.

Lime-tailed-hares-ear step 6 — 6 Take hold of the gold wire and wind it over the body in equally spaced turns. Secure the loose end with thread and then trim off the waste.

Step 6. Take hold of the gold wire and wind it over the body in equally spaced turns. Secure the loose end with thread and then trim off the waste.

Lime-tailed-hares-ear step 7 — 7 Tie in one strand of medium opal Mirage for the thorax cover. Mix some hare’s face fur, dub on to the thread and wind towards the eye.

Step 7. Tie in one strand of medium opal Mirage for the thorax cover. Mix some hare’s face fur, dub on to the thread and wind towards the eye.

Lime-tailed-hares-ear step 8 — 8 Bring the strand of opal Mirage over the top of the thorax and tie it down at the eye. Secure it with further turns of thread.

Step 8. Bring the strand of opal Mirage over the top of the thorax and tie it down at the eye. Secure it with further turns of thread.

Lime-tailed-hares-ear step 9 — 9 Trim off the waste end of Mirage. Form a neat head then cast off the tying thread with a whip finish. Finally, add two coats of clear varnish.

Step 9. Trim off the waste end of Mirage. Form a neat head then cast off the tying thread with a whip finish. Finally, add two coats of clear varnish.